How do I setup Yealink W52P/W56P Handset and Base

These steps assume you have signed up successfully and have access to your online portal available at DigitalJetstream LLC.

Step 1 - Hardware Power Up

Step 2 - Handset Registration to the Base

Long press the button on top of the base station till the registration LED slow flashes.
Then press the OK key to enter the main menu on the handset, select Settings->Registration->Register Handset.
Select the desired base and press the OK soft key. The handset begins searching the base.
Press the OK soft key after searching a base successfully.
Enter the base PIN (default: 0000), and then press the Done soft key to complete registration.
After the success of registration, the handset LCD screen prompts “Handset subscribed”.
If you have a second or thrid handset, simply repeat the process for each Handset.

Step 3 - Getting the IP address of the Base Station from the Handset

Press OK on the Handset - it will bring up the menu items.
Press OK again on the (i) Icon which is usually selected by default.
Press OK again on 1st menu item which says Base
The IP address will be displayed on the screen it should 4 numbers separated by a . (dot)

Step 4 - Retrieving your Phone/SIP Settings

Login to your online client area portal at https://www.digitaljetstream.com/whmcs/clientarea.php
Click on your name in the upper right-han corner - it should be the only one in the list
On the dropdown menu you will see email history. Find the email; VoIP Phone Number(s) Assigned
Please keep these details available for the next step and in a safe place.
Warning: Never give these details out to anyone, as this could compromise the security of your account.

Step 4 - Adding your DigitalJetstream VoIP Phone account details to the Base.

You will need to use a PC or Tablet connected to your Wifi or Home Lan.
Open an Internet Browser such as Chrome, Safari or Firefox
Type in the IP address of your base station - example 192.168.0.100 (you would need enter your own one)
A login screen for the base station should appear in your browser (see image below)
Enter the Username = admin and Password = admin
You will open up on the Status Tab - Select the Account Tab (image below)
Using the information from the above email, you would enter the following.
(You will need to enter the details from your Phone/SIP Settings)

Use the default Account1
Line Active = Select "Enabled" from the drop-down menu
Label "Enter your SIP Username" = (Example) 2164522300
Display Name "Enter your SIP Username" = (Example) 2164522300
Register Name "Enter your SIP Username" = (Example) 2164522300
Username "Enter your SIP Username" = (Example) 2164522300
Password "Enter your SIP Password = (Example) 5uy68jhtr9
Server Host "Enter your Server Host = sip.voipwelcome.com (Or other server provided by email)
Click Confirm at the bottom of the page
The Register Status at the top should change to Registered.

Step x - Setting your Time Server

Your service should now be fully operational.

Archivio Domande